|
Portable Anemometers HD 2103.1 - HD 2103.2
The HD2103.1 and HD2103.2 are portable instruments with a large LCD display. They are designed for use in the fields of air conditioning, heating, ventilation and
environmental comfort. They use hot-wire or vane probes to measure air speed, fl ow rate, and temperature inside pipelines and vents. Temperature only is measured by immersion, penetration or air contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000 or Ni1000.
HD 2103.1 - HD 2103.2
|
|
|
|
Portable Anemometers HD 2114P.0 - HD 2114P.2
The HD2114P.0 and HD2114P.2, HD2134P.0 and HD2134P.2 are portable micro-
manometers using Pitot tubes and a large LCD display. They are used to perform
measurements in the fields of air conditioning, heating and ventilation. They measure the differential pressure detected by a Pitot tube connected to the
instrument inputs acquiring the wind speed and fl ow rate inside pipelines and
vents. They also measure the temperature using a type K thermocouple sensor.
The instruments can be used as thermometers, and can be employed with any
kind of thermocouple K sensor if a standard miniature connector is used.
HD 2114P.0 - HD 2114P.2
HD 2134P.0 - HD 2134P.2
|
|
|
|
Portable Anemometers HD 2303.0
The HD2303.0 is a portable instrument with a large LCD display. It is designed
for use in the fields of air conditioning, heating, ventilation and environmental
comfort. It uses hot-wire or vane probes to measure air speed, fl ow rate, and temperature inside pipelines and vents. Temperature only is measured by immersion, penetration or air contact probes. The temperature sensor used can be chosen from the Pt100, Pt1000.
HD 2303.0
|
|
|
|
Portable Anemometers DO 2303
DO2003 is a portable instrument, datalogger specially designed to be used in
the fields of air-conditioning, heating, ventilation, environmental comfort, energy
saving both for industrial and residential application by means of a complete
probes series. It measures:
• Air speed and fl ow rate inside pipeline with hot-wire probes, vane probes or
Pitot tube probes
• relative humidity and temperature with combined probes
• differential pressure up to 2000 mbar and barometric pressure
• temperature with immersion, pointed or contact probes.
DO 2003
|
|
|
|
