Single Axis Position Controllers - Elgo Electric P9511/P9521

P9511/P9521 (single axis)

Compact single axis Position Controller

Single Axis Position Controllers


Positioning with up to 3 different speed rates
(up/down separately adjustable)
Measurement as incremental +, incremental - or absolute
Single set operation
program operation up to 10 sets (only P9521)
Input for index pulse
Material- and tool offset
Batch counter
Spindle compensation
Pulse multiplication factor
Tolerance window
Datum value
Dead man handle input
In- and outputs freely configurable in the menu


Positioning with potential free changeover-relay-outputs
P9511: Compact controller without program memory and manual inching
P9521: Compact controller with program memory and manual inching

Technical Specification:

Nominal voltage:

230 VAC / 50 Hz or 115 VAC / 60 Hz

Power consumption:

450 mA

Encoder supply:

+ 24 VDC

Input signals:

PNP active high, (option: NPN active low )
minimum pulse width 300 m/s, input current/pin: max. 10mA

Output signals:

Potential free changeovers 210 V / 2A (RP)

Power down memory:

NOVRAM (10 years)


Screw terminals


LED display, digit height: 8mm


16-Bit microprocessor with 32 KByte E-Prom and 16 KByte RAM

Input frequency:

10 KHz (higher on request)


metal, black, panel housing

Housing dimensions:

w x h x d = 92 x 66 x 89 mm

Cut out:

w x h = 93 x 67 mm

Operating temperature:

0... + 50 C

Protection class:

IP 40 (installed state)


Site Designed And Maintained By Panther Marketing And Design