|
Description
Programmer/process controller size 48x96 with frontal extraction of electronics.
One analog input for TC J, K, S, R, PT100, NI100, linear signals. Two relay outputs 8A resistive and one logic output SSR 12V-30mA programmable for command or alarm (band, deviation, general).
ATR420 is the ideal controller for simple firing cycles on kilns and furnaces with monitoring of all parameters. Frontal panel access to elapsed time from start, percentage of output, number of current step.
Special software functions assure precise and reliable firing profiles: Waiting function (useful whenever the plant is unable to reach the setpoint in the given time) and Recovery mode with programmable gradient (to restart the profile after power failure).
|
|
|
Ideal Application
Ceramic kilns
Plastics industry
Glass industry
Environmental chambers
Incubators CO2
Chemical industry
|
Technical data
SIZE: 48x96(frontal)x135mm
POWER SUPPLY: 12/24Vac, 115/230Vac ±10%, 50/60Hz
POWER CONSUMPTION: 4W
DISPLAY: double, 4 green digits, 8 red status LEDs
OPERATING CONDITIONS: 0-45°C, 35..95rH%
INPUTS:
1 analog input selectable for TC J, K, S, R, PT100, NI100, 0..1V, 0..10V, 0..20mA, 4..20mA
1 programmable digital input
OUTPUTS:
2 relays 8A resistive + 1 SSR 12V-50mA
CONTROL MODE: ON/OFF, PID- Autotuning
ACCURACY: : 0.5%±1digit for TC/RTD, 0.2%±1digit for V/mA
SAMPLING TIME: 250ms
SEALING: IP54 Frontal, IP30 Box, IP20 Terminal blocks
CONFIGURATION: parameters protected by password
Memory card for quick configuration
SPECIAL FUNCTIONS:
4 programmable cycles – max. 15 steps each
Waiting function
Recovery of interrupted cycle
Serial communication RS485 / Modbus-RTU |
